Ripple

$85.00$190.00

UPDATED DIE!

Panel Size:
– 922mm x 1837mm or 3ft x 6ft approx.
– 617mm x 1837mm or 2ft x 6ft approx.

Please scroll down for more product information & photos of this pattern

Clear

Sale not final until full PTP invoice received and confirmation made.

The Ripple design is simplistic and very similar to a mini orb or corrugated iron, allowing for a modern industrial effect. The Ripple design was reproduced by Pressed Tin Panels® as an addition to the original collection and for the Downing Centre in Sydney NSW. The Ripple design is suitable for dado wall or infill ceiling installations. I can be painted or powder coated in a myriad of colours. Suggested usage includes: dado wall panelling, infill for ceilings, kitchen splash backs, counter and bar fronts and many more.

Panel Specifications:

  • The panels are made from a specialised, mill grade aluminium that is approximately 0.55mm thick.
  • All of our aluminium panels are treated with a non-chromate treatment which prepares the surface for subsequent priming and painting or powder coating.
  • Painting or powder coating is recommended as without it panels are porous and surface scratches may be present as a result of the manufacturing process.
  • Updated die: this pattern has been enhanced. New die pressing measurements may differ slightly from old die pressings and the profile is intensified.

*Please note that this design is NOT recommended for stacking. Recommended uses include a dado panel (up to 900 mm high) and as an infill panel on ceilings. *

Please click here to contact us for more detailed product, pricing and/or supply information.

Ripple 152mm x 152mm pattern repeat:

Pattern repeat image example of Pressed Tin Panels Ripple pattern

 

 

Ripple full panel 922mm x 1837mm approx:

Full size image example of Pressed Tin Panels Ripple pattern

Installed example:

Ceiling ‘infill’ (smaller pattern repeat panel in-between main pattern and cornice)

 

ALL INFORMATION AND DIMENSIONS THAT ARE PROVIDED IS A GUIDE ONLY. UPDATED DIE: THIS PATTERN HAS BEEN ENHANCED. NEW DIE PRESSING MEASUREMENTS MAY DIFFER SLIGHTLY FROM OLD DIE PRESSINGS AND THE PROFILE IS INTENSIFIED. PROFESSIONAL PAINT SPECIALISTS SHOULD BE CONSULTED PRIOR TO PAINTING AND APPROPRIATE BUILDING CODES MUST BE COMPLIED TO. PRESSED TIN PANELS PTY LTD HOLDS NO RESPONSIBILITY FOR INCORRECT USE OF THIS PRODUCT.

Panel Size

922mm x 1837mm Approx, 617mm x 1837mm

Finish

Raw Aluminium – In Stock, Custom Colour – Lead Time Applies